Contained Workspace

Air King industrial air cleaners are a valuable tool for capturing most airborne nuisance particulate. Our self-contained filtration units continuously pull contaminated air through multiple stage of highly efficient micro-glass filters. The filtered air is then re-circulated back into the working environment without the need for duct work. This results in a cleaner, healthier atmosphere for employees, while saving you money by keeping heated or air-conditioned air inside your facility.

Air King Filter Hood Series

The Air King Filter Hood series units are designed to be a high-quality yet cost-effective solution to your “area specific” air filtration needs. These units are ideal for use over robotic welders, machining/welding work areas, plasma/laser or other cutting tables, or for any space where there are high concentrations of airborne nuisance particulate that you wish to isolate.

With 16 gauge, all-steel construction for safety and durability, the Filter Hood series can be configured in a number of ways to best suit your specific needs. Power options include either single phase motor with direct drive blower, or 3-phase motor with belt-drive blower configurations. Single or double blower configurations also available in multi-cabinet units. Hood sizes range from 34 x 63”, up to 126 x 144”.

All units are fully self-contained and do NOT require any additional intake/exhaust ducting. The modular design of our larger units allows you to locate the unit within a confined space or hard to access location. Our M-40RH2x10 & M-40RH3x12 units are shipped in 3 sub-assembled components on a single pallet for easy on-site movement and final assembly. All other units are shipped fully assembled and ready to install.

Our Filter Hood units include the following multi-stage filtration to provide the performance you require:

Stage 1 – 4″ aluminum mesh pre-filter(s) used to shield the inner filters and bags from sparks and hot metal grindings to prevent sources of ignition. These filters are washable and can be reused.

Stage 2 – 4″ pleated, industrial pre-filter(s) used to economically capture larger particles in the air while keeping the cost of the filter to a minimum.

Stage 3 – 25″, 8-pocket, Merv 11 bag filter(s) which handle the largest share of the particulate filtration process.

All filters are easy to access within the unit, allowing for quick and simple maintenance.

SERIES BROCHURE

  • Robotic weld cells
  • Machining/weld work areas
  • Plasma/laser tables
  • Localized particle containment
  • Other work areas/cutting tables
  • Washable aluminum mesh pre-filters (Stage 1)
  • Disposable pleated and bag filters (Stage 2 & 3)
  • Self-contained units have the versatility to be used most anywhere. NO DUCTING NEEDED.
  • Easy installation & maintenance
  • Four-way louvers for airflow pattern control
  • 16 gauge powder coated construction
  • Optional magnehelic gauge identifies filter change needs
  • Able to be relocated to accommodate growth or space redesign
  • 95% (Merv 15) 8 pocket bag filter upgrade
  • Pressure Gauge/Filter Change Indicator
  • Silencer with 4-way louver (reduces sound be 6-8 decibels)
  • Silencer w/non-directional grill (reduces sounds by 8-10 decibels)
  • Motor upgrade (3-phase units): 3 HP TEFCBB, 208-230/460/3/60; 8.6/4.3 amps
  • Optional motor (single phase units): 208-230VAC or 277VAC Single Phase 3/4hp motors
  • Needlepoint Bipolar Ionizer Module
  • Strut channel included with/affixed to all units
  • Hung with chains/cable
  • Mounted with all-thread rods

M-25RH1

The M-25RH1 features (1) four inch washable, aluminum mesh pre-filter, (1) four inch pleated, industrial pre-filter which catches the larger particles, and (1) Merv 11, or optional Merv 15, multi-pocket bag filter. Our disposable filters are easy to service and provide for simple, low-cost maintenance.

SPEC DRAWING

Dimensions34″W x 38″T x 86″L (hood size 34″W x 63″L)
Weight485 lbs
Volume (CFM)2500 CFM
Pre-Filters(1) 24”x24”x4” Aluminum Mesh, and (1) 24″x24″x4″ Pleated
Primary Filter(1) 65%, 36” 8 Pocket Bag (110 sq ft)
Motor3/4 HP PSC; 115/1/60; 9.5 amps
Blower10 x 10 Direct Drive, 2 speed
Construction/Paint16 Gauge; River Blue chemical resistant powder coating
Noise Level70 dBA
ApplicationArea Specific

M-25RH1x4

The M-25RH1x4 features (1) four inch washable, aluminum mesh pre-filter, (1) four inch pleated, industrial pre-filter which catches the larger particles, and (1) Merv 11, or optional Merv 15, multi-pocket bag filter. Our disposable filters are easy to service and provide for simple, low-cost maintenance.

SPEC DRAWING

Dimensions48″W x 38″T x 86″L (hood size 48″W x 63″L)
Weight500 lbs
Volume (CFM)2500 CFM
Pre-Filter(1) 24”x24”x4” Aluminum Mesh, and (1) 24″x24″x4″ Pleated
Primary Filter(1) 65%, 36” 8 Pocket Bag (110 sq ft)
Motor3/4 HP PSC; 115/1/60; 9.5 amps
Blower10 x 10 Direct Drive, 2 speed
Construction/Paint16 Gauge; River Blue chemical resistant powder coating
Noise Level70 dBA
ApplicationArea Specific

M-25RH2

The M-25RH2 features (2) four inch washable, aluminum mesh pre-filters, (2) four inch pleated, industrial pre-filters which catch the larger particles, and (2) Merv 11, or optional Merv 15, multi-pocket bag filters. Our disposable filters are easy to service and provide for simple, low-cost maintenance.

SPEC DRAWING

Dimensions58″W x 38″T x 86″L (hood size 58″W x 63″L)
Weight740 lbs
Volume (CFM)3000 CFM
Pre-Filter(2) 24”x24”x4” Aluminum Mesh, and (2) 24″x24″x4″ Pleated
Primary Filter(2) 65%, 36” 8 Pocket Bags (220 sq ft)
Motor3/4 HP PSC; 115/1/60; 9.5 amps
Blower10 x 10 Direct Drive, 2 speed
Construction/Paint16 Gauge; River Blue chemical resistant powder coating
Noise Level70 dBA
ApplicationArea Specific

M-25RH3

The M-25RH3 features (3) four inch washable, aluminum mesh pre-filters, (3) four inch pleated, industrial pre-filters which catch the larger particles, and (3) Merv 11, or optional Merv 15, multi-pocket bag filters. Our disposable filters are easy to service and provide for simple, low-cost maintenance.

SPEC DRAWING

Dimensions82″W x 38″T x 86″L (hood size 82″W x 63″L)
Weight990 lbs
Volume (CFM)3000 CFM
Pre-Filter(3) 24”x24”x4” Aluminum Mesh, and (3) 24″x24″x4″ Pleated
Primary Filter(3) 65%, 36” 8 Pocket Bags (330 sq ft)
Motor3/4 HP PSC; 115/1/60; 9.5 amps
Blower10 x 10 Direct Drive, 2 speed
Construction/Paint16 Gauge; River Blue chemical resistant powder coating
Noise Level70 dBA
ApplicationArea Specific

M-35RH1

The M-35RH1 features (2) four inch washable, aluminum mesh pre-filters, (2) four inch pleated, industrial pre-filters which catch the larger particles, and (2) Merv 11, or optional Merv 15, multi-pocket bag filters. Our disposable filters are easy to service and provide for simple, low-cost maintenance.

SPEC DRAWING

Dimensions34″W x 38″T x 126″L
Weight700 lbs
Volume (CFM)3500 CFM
Pre-Filter(2) 24”x24”x4” Aluminum Mesh, and (2) 24″x24″x4″ Pleated
Primary Filter(2) 65%, 25” 8 Pocket Bags (152 sq ft)
Motor2HP TEFC; 208-230/460/3/60; 6.0-5.8/2.9 amps
Blower11 x 8 Belt Drive, Single Speed
Construction/Paint16 Gauge; River Blue chemical resistant powder coating
Noise Level80 dBA
ApplicationArea Specific

M-40RH2

The M-40RH2 features (4) four inch washable, aluminum mesh pre-filters, (4) four inch pleated, industrial pre-filters which catch the larger particles, and (4) Merv 11, or optional Merv 15, multi-pocket bag filters. Our disposable filters are easy to service and provide for simple, low-cost maintenance.

SPEC DRAWING

Dimensions58″W x 38″T x 126″L
Weight1100 lbs
Volume (CFM)4000 CFM
Pre-Filter(4) 24”x24”x4” Aluminum Mesh, and (4) 24″x24″x4″ Pleated
Primary Filter(4) 65%, 25” 8 Pocket Bags (304 sq ft)
Motor2HP TEFC; 208-230/460/3/60; 6.0-5.8/2.9 amps
Blower11 x 8 Belt Drive, Single Speed
Construction/Paint16 Gauge; River Blue chemical resistant powder coating
Noise Level80 dBA
ApplicationArea Specific

M-40RH2x10

The M-40RH2x10 features (4) four inch washable, aluminum mesh pre-filters, (4) four inch pleated, industrial pre-filters which catch the larger particles, and (4) Merv 11, or optional Merv 15, multi-pocket bag filters. Our disposable filters are easy to service and provide for simple, low-cost maintenance.

SPEC DRAWING

Dimensions120″W x 38″T x 126″L
Weight1400 lbs
Volume (CFM)4000 CFM
Pre-Filter(4) 24”x24”x4” Aluminum Mesh, and (4) 24″x24″x4″ Pleated
Primary Filter(4) 65%, 25” 8 Pocket Bags (304 sq ft)
Motor2HP TEFC; 208-230/460/3/60; 6.0-5.8/2.9 amps
Blower11 x 8 Belt Drive, Single Speed
Construction/Paint16 Gauge; River Blue chemical resistant powder coating
Noise Level80 dBA
ApplicationArea Specific

M-40RH3

The M-40RH3 features (6) four inch washable, aluminum mesh pre-filters, (6) four inch pleated, industrial pre-filters which catch the larger particles, and (6) Merv 11, or optional Merv 15, multi-pocket bag filters. Our disposable filters are easy to service and provide for simple, low-cost maintenance.

SPEC DRAWING

Dimensions82″W x 38″T x 126″L
Weight1500 lbs
Volume (CFM)4000 CFM
Pre-Filter(6) 24”x24”x4” Aluminum Mesh, and (6) 24″x24″x4″ Pleated
Primary Filter(6) 65%, 25” 8 Pocket Bags (456 sq ft)
Motor2HP TEFC; 208-230/460/3/60; 6.0-5.8/2.9 amps
Blower11 x 8 Belt Drive, Single Speed
Construction/Paint16 Gauge; River Blue chemical resistant powder coating
Noise Level80 dBA
ApplicationArea Specific

M-40RH3x12

The M-40RH3x12 features (6) four inch washable, aluminum mesh pre-filters, (6) four inch pleated, industrial pre-filters which catch the larger particles, and (6) Merv 11, or optional Merv 15, multi-pocket bag filters. Our disposable filters are easy to service and provide for simple, low-cost maintenance.

SPEC DRAWING

Dimensions144″W x 38″T x 126″L
Weight1700 lbs
Volume (CFM)4000 CFM
Pre-Filters(6) 24”x24”x4” Aluminum Mesh, and (6) 24″x24″x4″ Pleated
Primary Filter(6) 65%, 25” 8 Pocket Bags (456 sq ft)
Motor2HP TEFC; 208-230/460/3/60; 6.0-5.8/2.9 amps
Blower11 x 8 Belt Drive, Single Speed
Construction/Paint16 Gauge; River Blue chemical resistant powder coating
Noise Level80 dBA
ApplicationArea Specific

M-11CF

placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder

SPEC DRAWING

Dimensionsplaceholder placeholder
Weightplaceholder placeholder
Volume (CFM)placeholder placeholder
Pre-Filterplaceholder placeholder
Primary Filterplaceholder placeholder
Motorplaceholder placeholder
Blowerplaceholder placeholder
Paintplaceholder placeholder
Noise Levelplaceholder placeholder
Applicationplaceholder placeholder

M-11CC

placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder

SPEC DRAWING

Dimensionsplaceholder placeholder
Weightplaceholder placeholder
Volume (CFM)placeholder placeholder
Pre-Filterplaceholder placeholder
Primary Filterplaceholder placeholder
Motorplaceholder placeholder
Blowerplaceholder placeholder
Paintplaceholder placeholder
Noise Levelplaceholder placeholder
Applicationplaceholder placeholder

M-11HE

placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder

SPEC DRAWING

Dimensionsplaceholder placeholder
Weightplaceholder placeholder
Volume (CFM)placeholder placeholder
Pre-Filterplaceholder placeholder
Primary Filterplaceholder placeholder
Motorplaceholder placeholder
Blowerplaceholder placeholder
Paintplaceholder placeholder
Noise Levelplaceholder placeholder
Applicationplaceholder placeholder

M-11

placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder

SPEC DRAWING

Dimensionsplaceholder placeholder
Weightplaceholder placeholder
Volume (CFM)placeholder placeholder
Pre-Filterplaceholder placeholder
Primary Filterplaceholder placeholder
Motorplaceholder placeholder
Blowerplaceholder placeholder
Paintplaceholder placeholder
Noise Levelplaceholder placeholder
Applicationplaceholder placeholder

M-11

placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder

SPEC DRAWING

Dimensionsplaceholder placeholder
Weightplaceholder placeholder
Volume (CFM)placeholder placeholder
Pre-Filterplaceholder placeholder
Primary Filterplaceholder placeholder
Motorplaceholder placeholder
Blowerplaceholder placeholder
Paintplaceholder placeholder
Noise Levelplaceholder placeholder
Applicationplaceholder placeholder

Tab 2 content.

Air King Filter Wall Series

The Air King Filter Wall series units are designed to be a high quality yet cost effective solution to your “side and back-draft” air filtration needs where overhead particulate collection is impractical. These units are ideal for use near welders, machining work cells, plasma/laser or other cutting tables, or for any space where there are high concentrations of airborne nuisance particulate that you wish to reduce their release to your overall shop environment.

With 16 gauge, all-steel construction for safety and durability, the Filter Wall series is available in either 78″ x 126″, or 102″ x 126″ sizes. Power options include either single phase motor with direct drive blower, or 3-phase motor with belt-drive blower configurations. Each unit comes with a forklift slip base to allow for easy placement and future mobility as your needs change.

All units are fully self-contained and do NOT require any additional intake/exhaust ducting. The modular design of our larger units allows you to locate the unit within a confined space or hard to access location. Our M-40FWV4 unit is shipped in 2 sub-assembled components on a single pallet for easy on-site movement and final assembly. The M-40FMV3 unit is shipped fully assembled and ready to install.

Our Filter Wall units provide the following multi-stage filtration to provide the performance you require:

Stage 1 – 4″ aluminum mesh pre-filter(s) used to shield the inner filters and bags from sparks and hot metal grindings to prevent sources of ignition. These filters are washable and can be reused.

Stage 2 – 4″ pleated, industrial pre-filter(s) used to economically capture larger particles in the air while keeping the cost of the filter to a minimum.

Stage 3 – 25″ 8-pocket, Merv 11 bag filter(s) which handle the largest share of the particulate filtration process.

All filters are easy to access within the unit, allowing for quick and simple maintenance.

SERIES BROCHURE

  • Side or back-draft air filtration (floor level)
  • Weld areas
  • Machining work cells
  • Laser/plasma or other cutting tables
  • Near grinding or deburring area
  • Area specific particle control
  • Washable aluminum mesh pre-filters (Stage 1)
  • Disposable pleated and bag filters (Stage 2 & 3)
  • Self-contained units have the versatility to be used most anywhere. NO DUCTING NEEDED.
  • Easy installation & maintenance
  • Vertical exhaust
  • 16 gauge powder coated construction
  • Optional magnehelic gauge identifies filter change needs
  • Able to be relocated to accommodate growth or space redesign

  • 95% (Merv 15) 8 pocket bag filter upgrade
  • Pressure Gauge/Filter Change Indicator
  • Silencer w/non-directional grill (reduces sounds by 8-10 decibels)
  • Motor upgrade (3-phase units): 3 HP TEFCBB, 208-230/460/3/60; 8.6/4.3 amps
  • Optional motor (single phase): 115VAC, 208-230VAC or 277VAC Single Phase 3/4hp motors with direct drive blower
  • Needlepoint Bipolar Ionizer Module

Filter wall units come with a forklift slip base to allow for easy placement and future mobility as your needs change.

M-40FWV3

The M-40FWV3 features (6) four inch washable, aluminum mesh pre-filters, (6) four inch pleated, industrial pre-filters which catch the larger particles, and (6) Merv 11, or optional Merv 15, multi-pocket bag filters. Our disposable filters are easy to service and provide for simple, low-cost maintenance.

SPEC DRAWING

Dimensions30”W x 78”T x 126”L
Weight1400 Lbs
Volume (CFM)4000 CFM
Pre-Filter(6) 24”x24”x4” Aluminum Mesh, and (6) 24″x24″x4″ Pleated
Primary Filter(6) 65%, 25” 8 Pocket Bags (456 sq ft)
Motor2HP TEFC; 208-230/460/3/60; 6.0-5.8/2.9 amps
Blower11 x 8 Belt Drive, Single Speed
Construction/Paint16 Gauge; River Blue chemical resistant powder coating
Noise Level80 dBA
ApplicationGeneral

M-40FWV4

The M-40FWV4 features (8) four inch washable, aluminum mesh pre-filters, (8) four inch pleated, industrial pre-filters which catch the larger particles, and (8) Merv 11, or optional Merv 15, multi-pocket bag filters. Our disposable filters are easy to service and provide for simple, low-cost maintenance.

SPEC DRAWING

Dimensions30”W x 102”T x 126”L
Weight1740 Lbs
Volume (CFM)4000 CFM
Pre-Filter(8) 24”x24”x4” Aluminum Mesh, and (8) 24″x24″x4″ Pleated
Primary Filter(8) 65%, 25” 8 Pocket Bags (608 sq ft)
Motor2HP TEFC; 208-230/460/3/60; 6.0-5.8/2.9 amps
Blower11 x 8 Belt Drive, Single Speed
Construction/Paint16 Gauge; River Blue chemical resistant powder coating
Noise Level80 dBA
ApplicationGeneral

M-25RH1x4

placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder

SPEC DRAWING

Dimensionsplaceholder placeholder
Weightplaceholder placeholder
Volume (CFM)placeholder placeholder
Pre-Filterplaceholder placeholder
Primary Filterplaceholder placeholder
Motorplaceholder placeholder
Blowerplaceholder placeholder
Paintplaceholder placeholder
Noise Levelplaceholder placeholder
Applicationplaceholder placeholder

M-25RH3

placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder

SPEC DRAWING

Dimensionsplaceholder placeholder
Weightplaceholder placeholder
Volume (CFM)placeholder placeholder
Pre-Filterplaceholder placeholder
Primary Filterplaceholder placeholder
Motorplaceholder placeholder
Blowerplaceholder placeholder
Paintplaceholder placeholder
Noise Levelplaceholder placeholder
Applicationplaceholder placeholder

M-35RH1

placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder

SPEC DRAWING

Dimensionsplaceholder placeholder
Weightplaceholder placeholder
Volume (CFM)placeholder placeholder
Pre-Filterplaceholder placeholder
Primary Filterplaceholder placeholder
Motorplaceholder placeholder
Blowerplaceholder placeholder
Paintplaceholder placeholder
Noise Levelplaceholder placeholder
Applicationplaceholder placeholder

M-40RH2

placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder

SPEC DRAWING

Dimensionsplaceholder placeholder
Weightplaceholder placeholder
Volume (CFM)placeholder placeholder
Pre-Filterplaceholder placeholder
Primary Filterplaceholder placeholder
Motorplaceholder placeholder
Blowerplaceholder placeholder
Paintplaceholder placeholder
Noise Levelplaceholder placeholder
Applicationplaceholder placeholder

M-40RH3

placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder

SPEC DRAWING

Dimensionsplaceholder placeholder
Weightplaceholder placeholder
Volume (CFM)placeholder placeholder
Pre-Filterplaceholder placeholder
Primary Filterplaceholder placeholder
Motorplaceholder placeholder
Blowerplaceholder placeholder
Paintplaceholder placeholder
Noise Levelplaceholder placeholder
Applicationplaceholder placeholder

M-40RH3x12

placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder

SPEC DRAWING

Dimensionsplaceholder placeholder
Weightplaceholder placeholder
Volume (CFM)placeholder placeholder
Pre-Filterplaceholder placeholder
Primary Filterplaceholder placeholder
Motorplaceholder placeholder
Blowerplaceholder placeholder
Paintplaceholder placeholder
Noise Levelplaceholder placeholder
Applicationplaceholder placeholder

M-11CF

placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder

SPEC DRAWING

Dimensionsplaceholder placeholder
Weightplaceholder placeholder
Volume (CFM)placeholder placeholder
Pre-Filterplaceholder placeholder
Primary Filterplaceholder placeholder
Motorplaceholder placeholder
Blowerplaceholder placeholder
Paintplaceholder placeholder
Noise Levelplaceholder placeholder
Applicationplaceholder placeholder

M-11CC

placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder

SPEC DRAWING

Dimensionsplaceholder placeholder
Weightplaceholder placeholder
Volume (CFM)placeholder placeholder
Pre-Filterplaceholder placeholder
Primary Filterplaceholder placeholder
Motorplaceholder placeholder
Blowerplaceholder placeholder
Paintplaceholder placeholder
Noise Levelplaceholder placeholder
Applicationplaceholder placeholder

M-11HE

placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder

SPEC DRAWING

Dimensionsplaceholder placeholder
Weightplaceholder placeholder
Volume (CFM)placeholder placeholder
Pre-Filterplaceholder placeholder
Primary Filterplaceholder placeholder
Motorplaceholder placeholder
Blowerplaceholder placeholder
Paintplaceholder placeholder
Noise Levelplaceholder placeholder
Applicationplaceholder placeholder

M-11

placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder

SPEC DRAWING

Dimensionsplaceholder placeholder
Weightplaceholder placeholder
Volume (CFM)placeholder placeholder
Pre-Filterplaceholder placeholder
Primary Filterplaceholder placeholder
Motorplaceholder placeholder
Blowerplaceholder placeholder
Paintplaceholder placeholder
Noise Levelplaceholder placeholder
Applicationplaceholder placeholder

M-11

placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder placeholder

SPEC DRAWING

Dimensionsplaceholder placeholder
Weightplaceholder placeholder
Volume (CFM)placeholder placeholder
Pre-Filterplaceholder placeholder
Primary Filterplaceholder placeholder
Motorplaceholder placeholder
Blowerplaceholder placeholder
Paintplaceholder placeholder
Noise Levelplaceholder placeholder
Applicationplaceholder placeholder

Tab 2 content.